FBV/700-450MG Automatic Bridge Saw

This machine allows to process (cut) slabs of marble and granite by means of a diamond disc cooled with water. The welded structure of the machine is at breast of technical progress and guarantees high steadiness, accuracy of working and absence of vibration.

All the water supply pipes, the nozzle and the disc casings are dimensioned in such a way that they guarantee the water flow for a good cooling of the disc during the processing phases, a good quality of the cut and a long tool life. The machine has been provided with lifting or fixing grommets.

They allow, together with ropes and lifting hooks, to lift the whole structure or the main components. The non-deformability of the parts is guaranteed during the unloading operation. The turning table is manually moved and it can be fixed with accuracy at every angular position, where it is possible to read the angular degree.

The customer has to arrange for the working surface covering of the table. The switch board is made of sheet steel, thickness 15/10 mm, painted with RAL 7032 paint, IP 55 protection level. The supplying unit is composed by a magnetothermic switch with shutter locking to avoid the opening of the switch board with tension.

It can be restored after opening the shutter, in case of maintenance. To guarantee the operator’s safety, an insulation transformer is installed inside for voltage 380V and output 48V for all the driving mechanisms.

Get a Quote
  • table visualized angular rotation – precision 0,01
  • unit of cut motor power kW 12/18
  • longitudinal movement motor power kW 1,1
  • transversal movement motor power kW 0,75
  • vertical disc up-down motor power kW 0,75
  • longitudinal useful cut mm 3500
  • transversal useful cut mm 3500
  • variable inclination passing cut from 0-45°
  • maximum cutting thickness mm marble 200  mm granite 120
  • disc diameter mm min 450 – max 700
  • maximum overall dimensions mm 5500×4300
  • 360° rotating table dimensions mm 3200×2000
  • “touch screen” multi-page graphic terminal to set a single measure
  • cable controlled emergency stop
  • water consumption l/min 30
  • air consumption at 6 bar l/min 10
  • total installed power kW 20,60
FBV/800-450 MG
Main motor power (2 Speed) 12 / 18 kW
Longitudinal motor power 1.1 kW
Transversal motor power 0.55 kW
Vertical up/down motor power 0.75 kW
Longitudinal length of cut 3500 mm
Transversal length of cut 3500 mm
Vertical stroke 250 mm
Maximum cutting thickness 250 mm
Blade diameter Ø450 – 800mm
Blade Inclination 0 – 45⁰
Overall dimensions 6000 x 4300 x 3300 mm
360⁰ Rotating Table 3200 x 2000 mm
Pneumatic Table Locks 2 No
Touch Screen Programmer Single Measure
Cable Control Emergency Stop  
Water consumption @ 2 bar 50 l/min
Water consumption @ 6 bar 10 l/min
Total installed power 21 kW
The above specifications are STANDARD specifications – some can be customized on request